SMART CUT is a high performance water soluble oil, designed for use in a variety of machining operations. Suitable for soft to medium hardness metals where soluble oil is recommended.
SMART CUT is suitable for wide range of machining for low to medium alloy steels, aluminum, brass, copper and copper alloys.
SMART CUT is recommended in an oil-to-water ratio of 1:10 to 1:50 or as per application required. Generally richer emulsion is used for more difficult jobs.
| Properties | Results | |
|---|---|---|
| Appearance | Clear | |
| Specific Gravity | @ 60 °F | 0.848 |
| Specific Gravity | @ 85 °F | 0.857 |
| Kinematic Viscosity | @ 40 °C, (cSt) | 5.12 |
| Flash Point (COC) | (°C) | 82 |
| Emulsion Stability Test | IP-263 | Pass |
| Corrosion of Cast Iron | IP-125 | Pass |
| Rust Prevention Characteristic | IP-287 | Pass |
| PH of 5 vol %, in water | 9.1 |
Atlas SMART CUT is unlikely to have any significant health or safety hazard when properly used in recommended application and following good standards of personal hygiene.
