SMART CUT is a high performance water soluble oil, designed for use in a variety of machining operations. Suitable from soft to medium hardness metals where soluble oil is recommended.
208L Drum
Forms stable emulsion.
Keep work piece and tool, cool and clean.
Antifoam and antirust.
Improves tool life and gives a better surface finish.
Resistance to bacterial growth.
SMART CUT is suitable for wide range of machining for low to medium alloy steels, aluminum, brass, copper and copper alloys.
SMART CUT is recommended in an oil-to-water ratio of 1:10 to 1:50 or as per application required.
Generally richer emulsion is used for more difficult jobs.
| Properties | Results |
|---|---|
| Appearance | Clear |
| Specific Gravity @ 60 °F | 0.867 |
| Kinematics Viscosity @ 40 °C, (cSt) | 18.25 |
| Flash Point (COC) (°C) | 210 |
| Emulsion Stability Test IP-263 | Pass |
| Corrosion of Cast Iron IP-125 | Pass |
| Rust Prevention Characteristic IP-287 | Pass |
| PH of 5 vol %, in water | 9.1 |
The typical characteristics mentioned represent mean values.
Atlas Smart Cut unlikely to have any significant health or safety hazard when properly used in
recommended application and follow good standards of personal hygiene.
Avoid prolong contact with skin. Use impermeable gloves while handling oil. After skin contact, wash
with soap and water